Scorpio Tango Original Universal Transponder Key Programmer FULL Version (all activation and accessories)

Original Scorpio-LK Tango transponder Key Programmer V1.115 Basic Software Support Toyota H 128 Bit Copy Function

The original Tango programmer is a new generation of transponder programmers developed to cover, read, write and create the latest transponders used in the most recent vehicle immobilizer technology.

Highlights of the original Tango Scorpio-LK Tango Key Programmer:

1. 100% Original Tango Scorpio-LK Tango
2. Free update online
3. Latest version: V1.116
4. Support Daihatsu G Chip function (need to pay)
5. After creating a new transponder with a TANGO programmer, You will not need any additional diagnostic equipment to program the created transponder on the vehicle!
   The car will start immediately, even on the new FIAT CODE 2 system, also used on PSA Group vehicles! You just have to rewrite the new file in the immobilizer!

Notice:

1. Connect TANGO to PC online, start the software [Help] >> [Check Update], then you can update Tango to the latest software.
2. Please visit Tango official website and update it within 28 days, Otherwise, it will be locked
3. If you want to get a license for special functions or cars, please refer to the official website also
4. If Tango has already obtained a G SIM license, it can generate a G SIM-only 10 times a day.

Tango Transponder Programmer Highlights

• Cloning of Toyota Smart keys on SLK-01, SLK-02, SLK-03/03E, SLK-04/04E, SLK-05/05E, SLK-07E emulators
• Subaru Image Generation Page1 14, 17
• TangoPlus Subaru Smart Key (Page1 F1, F3) Systems OBD framework
• Toyota-H Immobilizer All Keys Lost solution (Gen1 MCU 11910 & Gen2 MCU 12xxx) - Tango + Barracuda (all markets)
• Toyota-H Immobilizer All Keys Lost solution (Gen1 MCU 11910) - SLK-06 (all markets)
• Cloning of Toyota H-key [Blade](128bit) on LKP-04
• Toyota/Lexus Smart Key Systems OBD Framework
• Toyota G Immobilizers OBD Reset & Add Key (including EU type)
• Toyota/Lexus H Keys Image Generation Page1 39, 59, 5A, 99, 3A, 7A on TRPWS21 transponder
• Toyota/Lexus G Keys Image Generation and Cloning Page1 19,36,56,96,37,57 on LKP-02,CN5
• Toyota/Lexus/Subaru SmartKey Reset (40/80/128bit)
• FREE Off-line Full Copy of TIRIS DST (ID60-70) onto TPX2,EH2,CN2,CN5,LKP-02
• FREE Image generator ID70 on ID4D
• Image generator ID67/68 on ID4D
• Full FREE production of TP22, TP23, TP24, TP25
• Free write Component Security 7 bytes Tool (Megamos48)
• In-depth Manual and Technical Support Provided
• Searching of the 7th byte by existing car's key(Megamos48)

Tango transponder Key Programmer Hardware:

The device has an ergonomic design with high mechanical characteristics of IP65 class conforming to the DIN EN 60529 standard

1. The enclosure is made of 3mm ABS-plastics with a rubber shock-proof damping seal which simultaneously is a decor element
2. The derivative force from the USB cable also does not require an external power source
3. The TANGO uses a specific type of driver, which avoids con? it's with other devices working through virtual ports
4. The hardware design accommodates keys and transponders of all sizes
5. Dimensions: length 160mm; width 80mm; height 50-30mm

Tango Key Programmer Update Information:

Tango Version 1.116 (HW1.088),13 March 2020

• Again FIRST in the WORLD!
• TangoPlus for Subaru VI.0
• True Emulation via OBD of all Smart Keys Pagel Fl, F3*
• The only right conception to solve the "All Keys Lost" problem.
• Key maker Toyota H-Immo (All Keys Lost), based on Barracuda Image
• Dump: added cars Toyota Aygo, Citroen Cl, Peugeot 108
• Key maker Mercedes Benz Actros 2015- (95128,M13)
• Added Auto Update framework for supplementary files
• Some bugs fixed

Tango Version 1.115 (HW1.087),11 October 2019

• Key maker MQB Platform (Skoda, VW), based on Barracuda Image Dump
• Dealer key maker MQB Platform (Skoda, VW), based on Barracuda Image Dump
• Key maker Toyota H-Immo (All Keys Lost), based on Barracuda Image Dump
• key maker Ducati Scrambler 2015- (24C16, DST40)
• Key maker Chevrolet Spark 2009- (MC9S08EL32,MEG48,MEG8E)
• Key maker Maserati GranTurismo 2013- (MC912DG256, MEG48)
• Mitsubishi Mirage, L200 on EEPROM 95320 added two versions
• Volvo with 95320 and NEC added Remote programing
• Nissan 2010- (93C66Z93C76) added new versions
• BMW bike (25LC160,dashboard) added new version

Tango Software V1.114:

Tango software added (online update) Again FIRST in the WORLD!

• Toyota-H Immobilizer All Keys Lost solution (all markets)
• SLK-06 sniffer for Toyota-H Immobilizer AKL solution
• Again FIRST in the WORLD!
• True Image Generator for Toyota H-Keys (Page1 3A, 7A) on TRPWS21 transponder*
• Reset Subaru SmartKey (F3)*
• Key maker Nissan Micra 2005- (93C56, DST40)
• Key maker Nissan Tiida 2005- (93C56,DST40)
• Key maker SsangYong Action 2011- (S9S12,DST80)
• Key maker Ford Cargo 2014- (24C64, DST40)
• key maker Buick Excelle 2013- (9S12, DST80)
• Key maker Fiat Palio 2012- (95160,HITAG)
• Key maker SAIC Kai Yue 2013- (9S12, DST80)
• Key maker SAIC Datong V80 (95160,HITAG)
• Key maker MAN truck (M29W160, MEG13)
• Key maker BMW K19 (25160, DST80)
• Bugs fix and optimization

The device is meant for programming transponders, which are part of the immobilizer systems of cars.

In contrast to the previous model Gambit, the new model Tango is the dual-band device that allowed the addition of a list of supported transceivers with Texas Instruments (Tiris©) products.
TANGO Programmer is the next generation of transponder programmer that is constantly being developed to cover, read and write the latest transponders used in the latest vehicle immobilizer technology.

A new mileage reading function, VIN type, and transponder for all BMW keys have been added to the BMW Software Module.

Please note that after creating a new transponder using the TANGO programmer, you will not need any additional diagnostic equipment to program the created transponder on the vehicle.
The vehicle will start immediately, even on the new FIAT CODE 2 system, which is also used on PSA Group vehicles.
Simply rewrite the new file into the immobilizer.

The ever-growing list of key makers, which currently totals over 1,116 (over 580 are included with the core software)

Tango Key Programmer Supported Transponders

Philips Transponders:

• PCF7930-31 writing, reading
• PCF7935 writing, reading, shadow memory, crypto calculator
• PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
• PCF7941 transponder, remote, EEPROM, Manchester & Biphase encodings
• PCF7942 transponder, remote, EEPROM, Manchester & Biphase encodings
• PCF7943 transponder, remote, Manchester & Biphase encodings
• PCF7944 transponder, remote, EEPROM, Manchester & Biphase encodings
• PCF7945 transponder, remote, EEPROM, Manchester & Biphase encodings
• PCF7946 transponder, remote, Manchester & Biphase encodings
• PCF7947 transponder, remote, EEPROM, Manchester & Biphase encodings
• PCF7952 transponder, remote, EEPROM, Manchester & Biphase encodings
• PCF7961 transponder, remote, Manchester & Biphase encodings
• Auto-switching between PCF7936-PCF7961 windows if invalid type detected.
• Autodetect manchester / biphase

Temic Transponders:

• Temic 11 reading, writing to T5
• Temic 12 reading, writing to T5

Megamos Transponders:

• Megamos (13) reading, writing to T5, emulating on PCF7930-35
• Megamos (48) reading, writing, PIN, unlock by PIN, full range of memory contents, crypto calculation
• Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey

Texas Transponders:

• Tiris (4C) reading
• Tiris (4D) DST crypto reading, writing, crypto calculator
• Tiris (4E) DST crypto reading, writing, crypto calculator
• Tiris (8C) reading

Atmel:

• SAAB reading, writing to T5
• The product is in the working out stages, so the list of supported transponders will be developed later.

Key Maker Usage.

Key maker usage consists of four steps. The 4-TH step is additional and depends on the vehicle model.

• Open an immobilizer dump file.
• Choose a number of the key you want to create.
• Place a transponder into the coil and click the WRITE button.
• In some cases, the program asks you to save a modified immobilizer dump. This dump must be written into the immobilizer.

First of all, take a look at this picture. The "Loaded File" window displays the immobilizer file name.
Ensure that a valid dump is stored. The "Maker" window displays the selected maker name. Ensure the right key maker is selected.

The "info" windows display an important information:

1. Original Transponder: Informs you about the type of the original transponder
2. Allowed Transponder: Informs you what type of transponders is suitable for the key maker
3. Data Location: The immobilizer memory may be stored in various chips, the description informs you about where you have to read a dump.
   Some immobilizers can have various chipsets. In this case, the field displays several possible chips. Find one of them inside of the immobilizer and read it.
4. Data Size: Each chip has a certain memory size, the key maker accepts files with the described size.
5. Data Format: This field appears in the case of 93CXX EEPROM serial.

There are two standards of data layout:

Intel format and Motorola format or Little Endian and Big Endian respectively.
The data layout depends on a chip programmer that is used for EEPROM reading.
This field informs you what kind of format is suitable for the key maker. Usually, you can see that both formats are suitable.
It means that the program can understand any data layout.

How to use Tango Key Programmer

First, launch the key maker interface according to the vehicle and read the information in the Information window
Find out the chip inside the immobilizer and read it. Save the reading data (dump).
Click the "Open immobilizer file" button and load the saved dump file.
The program will analyze the dump.
If the dump is the correct "WRITE" button it will become active and the "Keys" window will display the range of key numbers that can be generated.
Take a look at the Info window, the Allowed transponder field.
Make sure to use a transponder of the exact type specified.
Put the transponder in the file.
Choose the key position you want to create in the "Keys" window.
Click the "WRITE" button.
This starts the writing process and the transmitter and receiver will store the appropriate data.
At this point, you may be asked to save a new dump to prevent movement.
The program displays a standard file-saving dialog where you have to save the data.
After that, you will be notified of the new data that is saved and must be written into the blocker.

Type the new discharge into the immobilizer. Now it is ready to work with the created transceiver.
If you do not ask to save a new file, the blocker is ready to work with the created transceiver without replacing the file.

finish

1. ABS Plastic Enclosure: IP65 / DIN EN 60529. ingress protection
2. Rubber seal: prevent slipping on the shockproof table function
3. USB Connection: no external power
4. Big Hole: Adopted for big keys
5. Three Small Holes: adopted for different sizes of transmitters and receivers

Frequently Asked Questions for Tango Key Programmer:

Q: The hardware is not found after installing the software and driver, how to solve it?
A: You need to install the software v1.83 first, then v1.84, next v1.85 (install the software from the oldest to the newest)

Q: Tango key support free update or not?
A: Free update You need to contact the official website to update once within 28 days, unlike that the device will be blocked.
If you need a special job or work on a special car model, you need to pay for it, and you can check the specific costs online

Q: Reprogram a BMW key, if I can delete the reprogrammed key with Tango?
A: No, it does not support this function

Q: Are there restrictions on Tango tokens? Is there any additional cost, such as the cost of updating?
A: There are no restrictions on Tango tokens. Free online software update.
But if you need a special job, or want to work on a special car model, you have to pay money to open the authorization.

Q: Do you have a Tango user guide?
A: You can check the Tango user guide in the list after installing the software