English
French
Spanish
Deutsch
Russian
X300 OBDStar DP Plus Full Immobilizer Device A Package
OBDSTAR X300 wiring diagrams, more intuitionistic and convenient & all details are available on the device
- SKU: TL31505
-
Category:
Key Programming / Diagnostics Tools
- MANUFACTURER: OBDStar
Attributes
| weight | 5 KG |
|---|
OBDSTAR X300 DP Plus A Configuration:
- Immobilizer+Special function(EEPROM+Key Renewing)Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)
- It doesn't support the following car models: DAIHATSU, PROTON, MAHINDRA, MARUTI, TATA, HOLDEN, LADA, PERODUA, IRAN (Please contact local dealers from your area to get authorization)
Differences among OBDSTAR X300 DP Plus C Package (Full Version), A Package, and B Package:
| Functions | Regional market | Software Configuration | X300 DP plus | Remark | ||
| A package | B package | C package | ||||
| Immobilizer / Remote programming | European cars | VW/Audi/Skoda/Seat (Standard) | √ | √ | √ | |
| VW/Audi/Skoda/Seat (Advanced) | √ | √ | √ | add NEC 24C64 2014-key programming. | ||
| BMW (Standard) | ||||||
| BMW (Advanced) | √ | √ | √ | Add FEM/BDC key programming, ISN code reading, etc. | ||
| Volvo | √ | √ | √ | |||
| The other European cars | √ | √ | √ | |||
| Asian cars | Hyundai /Kia (Standard) | |||||
| Hyundai /Kia (Advanced) | √ | √ | √ | Add 47/8A/46 smart key pin code reading | ||
| Toyota /Lexus (Standard) | ||||||
| Toyota /Lexus (Advanced) | √ | √ | √ | For Middle east cars, it adds H chip all keys lost (Immo box reset) | ||
| The Asian cars | √ | √ | √ | |||
| North American cars | Ford(Standard) | |||||
| Ford (Advanced) | √ | √ | √ | Add Ford after 2015 key programming functions, I.E: Mobdeo,Edge,Taurus,Escort,EVEREST,Explorer,F-150 SVT Raptor,Mustang,Lincoln MKZ, MKC and Continental 2015 - etc. | ||
| GM(Standard) | ||||||
| GM(Advanced) | √ | √ | √ | |||
| The other American & Chinese cars | √ | √ | √ | Can perform BMC pin code reading on these cars: -2017 Lacrosse, Lacrosse, Trax, Envision, GL8, MALIBU, AVEO, Excelle before 2015, Cruze, etc. | ||
| Cluster Calibration | All cars cluster calibration | √ | √ | |||
| 4-system diagnosis | Engine, Transmission, ABS, airbag reset | |||||
| OBDII Diagnosis | Full functions diagnosis | √ | Full-system all-cars diagnosis | |||
| Special function | Oil service reset | √ | Reset the Oil Service Light on | |||
| Manual remote setting | Some cars only support manual remote settings. | |||||
| ABS bleeding | √ | After replacing the ABS pump and related components. | ||||
| Battery matching | √ | After the battery is changed, you need to match the battery. | ||||
| ECU programming | √ | |||||
| The car with EPB replace brake pads | √ | An electronic Parking Brake release | ||||
| Throttle programming | √ | Used to clear the learning value after cleaning the throttle, otherwise, it will cause high idle speed. | ||||
| Airbag reset | √ | Used to clear airbag ECU collision data after a vehicle collision, otherwise, the ECU cannot be reused | ||||
| TPMS reset | √ | Used for a reset after tire pressure alarm | ||||
| Steering angle reset | √ | Replacement of data lost after steering angle change or power off | ||||
| OBDII Engine | √ | Used to diagnose the car with OBD protocol. | ||||
| DPF Regeneration | √ | Diesel Particulate Filter Operational | ||||
| Injector coding | √ | Used to match and code the injector after replacement | ||||
| Suspension match | √ | Used to match and set the suspension after adjusting. | ||||
| Gear learning | √ | Used to learn the crankshaft position sensor after power off (only the domestic vehicle equipped with the Delphi system has this function) | ||||
| CVT learning | √ | Used to reset the learning value after the maintenance of CVT transmission | ||||
| EEPROM | √ | Read and write the EEPROM; read 8-pin IC chip password and reset some models anti-theft | ||||
| Key Renew | √ | Renew the used keys to solve the problem that used keys cannot be matched to other models | ||||
| Steering angle repair | √ | Used for the repair of lost data of vehicle steering angle sensor | ||||
| ECU Clone | √ | Used for copying the program when replacing the new/second-hand computer. | ||||
| Switch activation | √ | |||||
| Hardware | P001 Programmer unit | √ | √ | √ | ||
| C001 circuit board | √ | √ | √ | |||
| C002 circuit board | √ | √ | √ | |||
| W001 data cable | √ | √ | √ | |||
| W002 data cable | √ | √ | √ | |||
| W003 data cable | √ | √ | √ | |||
| Toyota smart key emulators | √ | √ | √ | |||
| Remote Tester | √ | √ | √ | |||
| Anti-theft Induction coil | √ | √ | √ | Used to test if the coil can send out the transmit signal. | ||
OBDSTAR X300 DP Plus A Configuration Software Advantages:
1. Add “Help” functions: Contain built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.
2. Carlist: can directly get on the device
3. Upgrade Announcement: all details are available on the device
4. Customers can look up the features or uniquely support functions on the device
5. Help notes: built-in help notes for each model or function
6. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient
How to use OBDSTAR X300 DP Plus Induction Coil?
I. Functional Overview:
Induction Coil is used to detecting the key induction coil failure of the vehicle.
II. Application Method:
Attach the Induction Coil to the key induction coil, and insert the key or turn the ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is
good; the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.
OBDSTAR X300 DP Plus A Configuration Technical Parameters:
| Operation system: | Android 5.1.1 |
| CPU | Exynos4418 Dual Core ARM Cortex A9 1.4GHz |
| Battery | 3700mA, rechargeable polymer lithium battery |
| Extension memory card | 32G Micro SD (TF) card supported |
| Memory capacity | 1GB |
| Storage capacity | 32GB |
| LCD | 8.0 inch |
| LCD resolution | 1280*800 |
| Touch screen | Capacitive touch screen |
| Camera | 5 mega rearview camera |
| Wifi | Supported |
| Working Temperature | -10℃ ~ 55℃（14℉ ~ 131℉ ） |
| Storage Temperature | -20℃ ~ 70℃（-4℉ ~ 158℉ ） |
| Dimension | 254mm*174*mm*35mm |
Other Configurations:
B Package: Immobilizer+Special function(EEPROM+Key Renewing)+Mileage correction+Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data
cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)
C Package: Immobilizer+Mileage correction+Diagnosis+Special function (Oil reset +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag reset+
TPMS+Steering angle reset+OBDII+DPF+Injector coding+Suspension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning)Adapter(P001 programmer+
C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)