Xhorse XKFEF6EN VVDI Key Tool Universal Wired Key Remote Control

Xhorse Universal Wire Remote Key 4 Button for VVDI Key Tool Back Cover XKFEF6EN

This is a new universal wired remote key from Xhorse VVDI, XK series, XKFEF6EN - XKFEF6.
Work with VVDI KEY TOOL / MINI Key Tool / VVDI Key Tool Max / VVDI2 This VVDI remote control (XKFEF6EN) has 4 buttons: lock, unlock, trunk, and panic.
This Xhorse remote control (XKFEF6EN) requires a lithium button battery (not included, purchase separately).

XKFEF6EN is designed for use with Xhorse VVDI Key Tool Remote Generator, VVDI Mini Key Tool, VVDI2, VVDI Key Tool Max, and VVDI Key Tool Plus.

This XKFEF6EN universal key is also known as wired remote, wired remote, universal key, xhorse key, or VVDI key.

Please note that the key blade is not included with this Xhorse XKFEF6EN remote control.
We have a variety of universal remote key blades.

No transponder chip is installed in this (MAKE) type remote control.
You can generate or regenerate this remote control using any VVDI key tool, you need to remove the battery before connecting the remote control with a cable (plug connection).

XKFEF6EN is not a key fob replacement for a specific car brand, it is a universal remote that can be generated for many car brands and models.
You can install the Xhorse app and view the list of supported vehicles.
This key must be programmed by a professional automotive locksmith.

Xhorse wired remote controls are universal remote controls that can be used for vehicles, garages, gates, and many other modules.
With the Xhorse wired remote control, you can generate a wide range of remote control types.
If the vehicle requires a transponder chip, you must add an OEM transponder chip to the remote.
Alternatively, it is suggested to add an Xhorse Super XT27A01 chip and clone the original transponder key data using one of the Xhorse key programming devices.
 

How to generate Xhorse wired remote control:

Open the VVDI wired remote control and remove the battery.
Connect the Xhorse remote data cable to the white connector on the Xhorse remote PCB and plug it into the VVDI Key Tool.
Select the remote you want to generate using the VVDI Key Tool.
Unplug the cable, reinsert the battery, and reassemble the remote.
Program the remote to the vehicle the same way you would program an OEM remote.
If necessary, add a transponder chip and program it to the vehicle.